Unveiling the Solution: Tackling Windows 10 Update Error 0xC1900101-0x30018
Prepare your computer for the update
To prepare your computer for the Windows 10 update and fix the 0xC1900101-0x30018 error, follow these steps:
1. Search for “Disk Cleanup” in the Windows search bar and open the tool.
2. Select the drive where Windows is installed and click “OK.”
3. Check the boxes for “Temporary files” and “Previous Windows installations” and click “OK” to start the cleanup process.
4. Disconnect any unnecessary USB devices, such as a sound card or external hard drive.
5. Update your device drivers to the latest version. Visit the manufacturer’s website for instructions.
6. Disable any antivirus programs temporarily during the update process.
7. If you encounter specific error codes during the update, search online for their descriptions to find more troubleshooting options.
8. If you have made any changes to the BIOS settings, revert them to their default values.
9. Restart your computer and try the update again using Windows Update or the installation media.
By following these steps, you can resolve the 0xC1900101-0x30018 error and successfully update your Windows 10 operating system.
Disable secure boot and onboard sound
To fix Windows 10 Update Error 0xC1900101-0x30018, you may need to disable Secure Boot and onboard sound.
Here’s how you can do it:
1. Restart your PC and enter the BIOS settings. The key to access the BIOS may vary depending on your device, but it’s often the Delete or F2 key.
2. Look for the Secure Boot option in the BIOS settings. Disable it to allow for the installation or upgrade process.
3. Next, locate the onboard sound option in the BIOS settings. Disable it as well.
4. Save the changes and exit the BIOS settings.
5. Proceed with the Windows update or installation process as usual.
By disabling Secure Boot and onboard sound, you may overcome the error and successfully update or install Windows 10. Remember to enable these features again after the update or installation is complete, if desired.
Install Windows using media creation tool
- Download the Windows 10 Media Creation Tool from the official Microsoft website.
- Once the download is complete, locate the downloaded file and double-click on it to run the tool.
- When prompted by the User Account Control, click “Yes” to allow the tool to make changes to your device.
- In the Windows 10 Setup window, select “Create installation media (USB flash drive, DVD, or ISO file) for another PC” and click “Next”.
- Choose the desired language, architecture, and edition of Windows 10 that matches your current installation, and click “Next”.
- Select the “USB flash drive” option and click “Next”.
- Insert a blank USB flash drive with at least 8GB of storage capacity into your computer.
- Choose the USB flash drive from the list of available drives and click “Next”.
- Wait for the Windows 10 Media Creation Tool to download the necessary files and create the bootable USB flash drive.
- Once the process is complete, restart your computer and boot from the USB flash drive.
- Follow the on-screen instructions to install a fresh copy of Windows 10 on your computer.
- After the installation is complete, check if the Windows 10 Update Error 0xC1900101-0x30018 is resolved.
Try the DISM tool and registry hotfix
To fix Windows 10 Update Error 0xC1900101-0x30018, try using the DISM tool and a registry hotfix. Follow these steps:
Step 1: Search for “Disk Cleanup” in the Windows search bar and open the Disk Cleanup utility.
Step 2: Select the drive where Windows is installed and click “OK.”
Step 3: In the Disk Cleanup window, click on “Clean up system files.”
Step 4: Check the box next to “Windows Update Cleanup” and click “OK.”
Step 5: Run the DISM tool by opening Command Prompt as an administrator and typing “dism /online /cleanup-image /restorehealth.”
Step 6: Wait for the process to complete and then restart your computer.
Step 7: Download and install the registry hotfix from the Microsoft website.
Step 8: After installing the hotfix, restart your computer once again.
These steps should help resolve the error and allow you to update your Windows 10 operating system without any issues.
Reset Windows update components and troubleshooters
- Open the Command Prompt as an administrator by typing “cmd” in the search bar, right-clicking on “Command Prompt,” and selecting “Run as administrator.”
- Type the following commands one by one and press Enter after each command:
- net stop wuauserv
- net stop cryptSvc
- net stop bits
- net stop msiserver
- Next, you need to rename the SoftwareDistribution and Catroot2 folders. To do this, type the following commands in the Command Prompt and press Enter after each command:
- ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
- ren C:\Windows\System32\catroot2 Catroot2.old
- Now, restart the Windows Update services by typing the following commands and pressing Enter after each command:
- net start wuauserv
- net start cryptSvc
- net start bits
- net start msiserver
- Finally, restart your computer and try updating Windows again to see if the error is resolved.
- Open the Settings app by pressing Win + I on your keyboard.
- Click on “Update & Security” and then select “Troubleshoot” from the left-hand menu.
- Under the “Get up and running” section, click on “Windows Update” and then click on the “Run the troubleshooter” button.
- Follow the on-screen instructions provided by the troubleshooter to detect and fix any issues related to Windows Update.
- Once the troubleshooter has completed its process, restart your computer and check if the error has been resolved.
Disable Wi-Fi and remove external devices
To fix Windows 10 Update Error 0xC1900101-0x30018, try disabling Wi-Fi and removing external devices. This can help resolve any potential conflicts during the update process. Here’s how:
1. Disable Wi-Fi:
– Open the Network & Internet settings by right-clicking the Start button and selecting “Settings”.
– Go to “Network & Internet” and click on “Wi-Fi” in the left sidebar.
– Toggle the Wi-Fi switch to the off position.
2. Remove external devices:
– Disconnect any external devices such as USB devices, sound cards, or printers from your computer.
By following these steps, you can eliminate any potential issues caused by conflicting hardware or network connections. Once you’ve completed these steps, you can proceed with the Windows 10 update process. If you encounter any other errors or issues, refer to the appropriate troubleshooting methods or seek further assistance from Microsoft Support.
Free up disk space and clean install Windows
- Open File Explorer by pressing Windows key + E.
- Select the C: drive or the drive where Windows is installed.
- Right-click on the drive and choose Properties.
- In the General tab, click on the Disk Cleanup button.
- Check the boxes for the types of files you want to delete, such as Temporary files and Recycle Bin.
- Click on OK to start the cleanup process.
- Once the cleanup is complete, restart your computer.
Repair Method 2: Clean install Windows
- Back up all your important files and documents to an external storage device.
- Create a Windows 10 installation media by downloading the Media Creation Tool from the official Microsoft website.
- Insert the installation media into your computer and restart it.
- Press any key to boot from the installation media when prompted.
- Select your language preferences and click on Next.
- Click on Install Now to start the installation process.
- Follow the on-screen instructions to complete the installation.
- When prompted, choose the option to Keep personal files and apps.
- Wait for the installation to finish and then restart your computer.
Perform system file repairs and clean boot
Performing system file repairs and clean boot can help resolve the Windows 10 Update Error 0xC1900101-0x30018. Here’s how to do it:
Step 1: Search for “Disk Cleanup” in the Windows search bar. Open the utility and select the drive where Windows is installed. Check the boxes for “Temporary files” and “Previous Windows installations” and click “OK” to clean up unnecessary files.
Step 2: Perform a clean boot by pressing the Windows key + R, typing “msconfig”, and hitting Enter. In the System Configuration window, go to the “Services” tab and check the box for “Hide all Microsoft services”. Then click “Disable all” and go to the “Startup” tab. Click “Open Task Manager” and disable all startup items. Close Task Manager and restart your computer.
These steps can help fix the error and allow you to continue the Windows 10 update process. If you encounter any other issues, refer to the error message or error codes for more information and search for specific solutions online.