Navigating the digital labyrinth of Windows 10 can sometimes lead us to unexpected dead ends. One such frustrating encounter is the 0x80070035 Network Path Not Found Error. But fear not, as we unravel the mysteries and provide you with the ultimate guide to fix this perplexing issue.
Troubleshooting Solutions for Network Path Not Found on Windows 10
If you encounter the “0x80070035 Network Path Not Found” error on your Windows 10 computer, there are a few steps you can take to fix it.
Step 1: Check your network connection and ensure all devices are properly connected to the network.
Step 2: Verify that the network path you are trying to access is correct. Make sure you have the correct spelling and that the shared folder or printer is available on the network.
Step 3: Ensure that your Windows 10 computer is properly connected to the domain, if applicable. Check if the domain controller is accessible and that your computer has the necessary permissions to access the network resources.
Step 4: If you are trying to access a network drive, make sure it is properly mapped to your computer. You can do this by going to “File Explorer” and selecting “Map network drive” from the “Computer” tab.
Step 5: If you are still experiencing issues, try disabling any firewall or antivirus software temporarily. Sometimes, these programs can block network connections.
These troubleshooting solutions should help you resolve the “0x80070035 Network Path Not Found” error on your Windows 10 computer.
Alternative Approaches to Local Network Sharing
- Utilize the HomeGroup feature: The HomeGroup feature allows for easy sharing of files and printers between computers on the same network. Set up a HomeGroup and invite other devices to join, ensuring seamless network sharing.
- Check network discovery settings: Ensure that network discovery is enabled on all devices to allow them to locate and connect to each other on the network. Adjust the network discovery settings in the Control Panel to resolve any potential issues.
- Disable third-party firewalls: Some third-party firewalls may interfere with local network sharing. Temporarily disable these firewalls to check if they are causing the “0x80070035 Network Path Not Found” error. If the issue is resolved, consider configuring the firewall settings to allow network sharing.
- Verify network sharing permissions: Ensure that the necessary permissions are granted to the shared folders and devices. Check the sharing options of the specific files or folders and adjust the permissions accordingly to avoid any access restrictions.
- Use the correct network path: Double-check the network path entered when accessing shared resources. Make sure the path includes the correct IP address or computer name, ensuring accurate communication between devices and preventing the “Network Path Not Found” error.
- Restart network-related services: Restarting network-related services can help resolve any temporary glitches. Restart the “Server” and “Workstation” services in the Services Manager to ensure smooth network sharing.
- Update network drivers: Outdated or faulty network drivers can cause network-related errors. Update the network drivers for all relevant devices to ensure compatibility and optimal network performance.
- Reset TCP/IP stack: Resetting the TCP/IP stack can resolve network issues. Use the Command Prompt to run the necessary commands to reset the TCP/IP stack and fix any underlying network problems.
- Disable IPv6: Disabling the IPv6 protocol can sometimes resolve network sharing issues. Adjust the network adapter settings to disable IPv6 and check if it resolves the “0x80070035 Network Path Not Found” error.
- Perform a network troubleshooter: Windows provides a built-in network troubleshooter that can automatically detect and fix common network issues. Run the network troubleshooter to identify and resolve any problems affecting local network sharing.
Methods to Resolve Error Code 0x80070035: Network Path Not Found
Step 1: Verify network connectivity
– Check if all devices are properly connected to the network.
– Ensure that the domain controller is accessible.
– Confirm active directory functionality.
Step 2: Enable File and Printer Sharing
– Press the Windows key and type “Control Panel.”
– Open the Control Panel and navigate to “Network and Sharing Center.”
– Click on “Advanced Sharing Settings.”
– Enable “File and Printer Sharing” for the desired network profile.
– Click “Save changes.”
Step 3: Add Exception to Firewall
– Go to the Control Panel and select “Windows Defender Firewall.”
– Click on “Allow an app or feature through Windows Defender Firewall.”
– Click on “Change settings” and then “Allow another app.”
– Add “File and Printer Sharing” to the list.
– Click “OK” to save the changes.
Step 4: Check UNC Path and Shared Folder
– Ensure that the UNC path and shared folder are correct.
– Verify the permissions for the shared folder.
If the error persists, consider seeking further assistance or referring to Microsoft’s support resources for additional solutions.
python
import subprocess
def check_network_path(path):
try:
# Execute a command to check if the network path exists
result = subprocess.run(["ping", "-n", "1", path], capture_output=True, text=True, timeout=10)
if result.returncode == 0:
print("Network path found!")
else:
print("Network path not found!")
except subprocess.TimeoutExpired:
print("Ping request timed out.")
except Exception as e:
print(f"An error occurred: {str(e)}")
# Usage example
path_to_check = "192.168.0.100"
check_network_path(path_to_check)
In this example, we use the `subprocess` module in Python to execute a ping command (`ping -n 1
Please note that network troubleshooting can be complex, and this code is only a basic example. Real-world scenarios may require additional checks, error handling, or interaction with specific Windows APIs. It’s always recommended to refer to official documentation or consult experts for a more comprehensive solution tailored to your specific network setup.
Configuring Network Settings to Enable File Sharing and Discovery
| Configuring Network Settings to Enable File Sharing and Discovery | |
|---|---|
| Error Code: | 0x80070035 |
| Error Message: | Network Path Not Found Error |
| Operating System: | Windows 10 |
| Issue: | Unable to access shared files or devices on the network |
| Possible Causes: |
|
| Solution: |
|
| Additional Tips: |
|
