Preparing Automatic Repair Loop Fix for Windows 10 Asus

In this article, we will explore how to fix the automatic repair loop issue in Windows 10 on an Asus computer.

Overview of Preparing Automatic Repair error on Windows 10

If you’re experiencing the Preparing Automatic Repair error on your Windows 10 Asus laptop, don’t panic. This error occurs when your system encounters an issue during startup, and your PC enters into a loop where it is unable to boot.

To fix this problem, follow these steps:

1. Restart your computer three times, and on the fourth time, Windows will automatically enter the Automatic Repair mode.

2. If nothing happens, turn off your PC and press the power button to restart it. Repeat the process until you see the Automatic Repair screen.

3. From this screen, select “Advanced Options.”

4. Next, choose “Troubleshoot” and then “Advanced Options” again.

5. Select “Startup Settings” and click “Restart.”

6. Once your PC restarts, press the F12 or other function keys to enter the boot manager.

7. Choose your Windows 10 installation disk and press Enter.

8. On the “Install Windows” page, click “Repair your computer.”

9. Select “Troubleshoot” and then “Advanced Options.”

10. Finally, select “Command Prompt” and run the MiniTool Partition Wizard software to repair any disk errors and system files.

By following these steps, you can fix the Preparing Automatic Repair error and get your Windows 10 Asus up and running again.

Symptoms and causes of the Automatic Repair loop

• Symptoms: When booting up the computer, it enters an Automatic Repair loop, displaying the message “Preparing Automatic Repair.”
• Causes: There are various reasons why the Automatic Repair loop occurs, such as corrupted system files, damaged hard drive, or outdated BIOS.

Repair Steps

1. Enter Safe Mode: Boot the computer into Safe Mode by repeatedly pressing the F8 key during startup.
• Select “Safe Mode with Networking” to allow network connectivity while in Safe Mode.
  
2. Run System Restore: In Safe Mode, run System Restore to revert the system settings to a previous restore point.
• Click “Start” and search for “System Restore.”
• Select “System Restore” and choose a restore point that was created before the Automatic Repair loop occurred.
  
• Follow the prompts to complete the system restore process.
3. Run Startup Repair: If System Restore fails, run Startup Repair to automatically fix any startup issues.
• Insert the Windows installation media and boot from it.
• Select “Troubleshoot” > “Advanced options” > “Startup Repair.”
• Follow the prompts to complete the Startup Repair process.
4. Repair BCD: If Startup Repair fails, repair the Boot Configuration Data (BCD).
• Boot from the Windows installation media and select “Command Prompt.”
• Type the following commands in order:
• bootrec /fixmbr
• bootrec /fixboot
  
• bootrec /scanos
• bootrec /rebuildbcd
  
• Restart the computer and see if the Automatic Repair loop has been resolved.
5. Reset PC: If none of the above methods work, reset the PC to its default settings.
• Insert the Windows installation media and boot from it.
• Select “Install now” and choose “Custom Install.”
• Select the partition where Windows is installed and click “Next.”
• Follow the prompts to complete the installation process.
  

Performing a hard reboot to fix the issue

To perform a hard reboot and fix the Preparing Automatic Repair Loop issue on your Windows 10 Asus laptop, follow these steps:

1. Press and hold the power button until your laptop turns off.
2. Press the power button again to turn on your laptop and immediately start pressing the F12 or ESC keys to enter the boot manager.
3. Select the troubleshoot menu and navigate to advanced options.
4. Click on the command prompt option and type “bootrec /fixmbr” and hit enter.
5. Type “bootrec /fixboot” and hit enter.
6. Type “bootrec /rebuildbcd” and hit enter.

This should fix the loop issue and allow you to boot up your laptop without any further problems. If you continue to experience PC issues, consider using MiniTool Partition Wizard to check for disk errors or try other solutions outlined in this article.


@echo off
echo Starting Automatic Repair Tool...
bcdedit /set {default} recoveryenabled yes
bcdedit /set {default} bootstatuspolicy ignoreallfailures
echo Automatic Repair Tool is now enabled.
pause


This code sets the necessary boot configuration data (BCD) entries to enable automatic repair in Windows 10 Asus. It essentially tells the system to attempt automatic repairs if it fails to boot properly. This code can be saved as a batch file and run on the affected computer to enable automatic repair.

Note that this code is provided as an example only and may not work for all scenarios. Additionally, it is important to have a backup of your system before attempting any repairs or modifications.

Booting into Safe Mode to troubleshoot

Booting into Safe Mode can be an effective way to troubleshoot PC issues, including the Preparing Automatic Repair Loop Fix for Windows 10 Asus. To access Safe Mode, follow these steps:

1. Power on your computer and press the F8 key repeatedly until the Advanced Boot Options menu appears.
2. Use the arrow keys to select Safe Mode with Networking and press Enter.
3. Once in Safe Mode, open the Troubleshoot menu by pressing the Windows key + I and selecting Update & Security > Recovery > Advanced startup > Restart now.
4. After restarting, select Troubleshoot > Advanced options > Startup Settings > Restart.
5. When your computer reboots, press F5 to select Safe Mode with Networking.

From here, you can try various solutions to fix the Preparing Automatic Repair Loop Fix, such as repairing your PC using the System Partition or running a virus scan with trusted software. If you’re still experiencing issues, check online threads or consult a guide for more specific instructions.

Rebuilding BCD with the Command Prompt

To rebuild BCD with Command Prompt, follow these steps:

1. Boot your Windows 10 Asus laptop from a Windows installation media or a System Repair Disc.

2. Choose your language preferences, and click Next.

3. Click on Repair your computer.

4. Select Troubleshoot > Advanced options > Command Prompt.

5. In the Command Prompt window, type bootrec /rebuildbcd and press Enter.

6. When prompted, choose Yes to add the installation to the boot list.

7. Type bootrec /fixmbr and press Enter.

8. Type bootrec /fixboot and press Enter.

9. Type exit and press Enter to close the Command Prompt window.

10. Restart your laptop and see if the problem has been resolved.

This method can fix various issues, such as the Windows Automatic Repair loop, black screen, blank screen, and death error. It’s also applicable for Dell, Asus VivoBook, Lenovo, and HP laptops. If this solution doesn’t work for you, check out other threads or guides for alternative methods.

Disabling Automatic Repair at boot

To disable Automatic Repair at boot in Windows 10 Asus, follow these steps:

1. Press the Windows key + R to open the Run dialog box.
2. Type “regedit” and press Enter to open the Registry Editor.
3. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\BootExecute.
4. Double-click on the “autocheck autochk *” value and add ” /K:C” to the end of the line.
5. Click OK and close the Registry Editor.

This will disable Automatic Repair at boot and prevent the Preparing Automatic Repair loop from appearing. Note that this method only works for Windows 10. If you’re experiencing a different issue or using a different operating system, refer to a relevant guide or seek further assistance.

Running Fixboot and Chkdsk commands

Repairing corrupted system files

To repair corrupted system files causing the Preparing Automatic Repair loop in Windows 10 Asus laptops, follow these steps:

1. Restart your laptop and press F8 to enter Advanced Boot Options.
2. Select “Repair Your Computer” and press Enter.
3. Select “Troubleshoot” > “Advanced Options” > “Command Prompt.”
4. Type “sfc /scannow” and press Enter to initiate the System File Checker tool.
5. Wait for the scan to complete and follow any prompts to repair corrupted files.
6. Restart your laptop and check if the issue is resolved.

If the Preparing Automatic Repair loop persists, try booting into Safe Mode or using System Restore. For Dell laptops, use the Dell Recovery and Restore tool. For Asus VivoBook, Lenovo, or HP laptops, refer to their respective user manuals for specific recovery options. Remember to back up your important data before attempting any repairs.

Restoring the Windows Registry

Resetting or refreshing Windows 10

• Accessing Recovery Environment
• Restart the computer and press the F11 key repeatedly until the Choose an option screen appears.
  
• Resetting Windows 10
• Click Troubleshoot.
• Click Reset this PC.
• Click Remove everything.
• Select the Only the drive where Windows is installed option.
  
• Click Just remove my files.
• Click Reset.
• Refreshing Windows 10
• Click Troubleshoot.
• Click Reset this PC.
• Click Keep my files.
• Follow the on-screen instructions to complete the process.
  

Checking hardware to fix the issue

To fix the Preparing Automatic Repair Loop, checking the hardware is crucial. First, unplug all external devices, including USBs and printers. Then, restart the computer and enter the BIOS setup by pressing F2 or Del. Check if the hard drive is detected in the BIOS. If not, the hard drive may be the cause of the issue. If the hard drive is detected, run a diagnostic test on the hard drive through the BIOS. If there are errors, replace the hard drive. If the hard drive passes the test, check for any loose connections on the motherboard. If everything seems to be in order, try resetting the BIOS to default settings by pressing F9 or Load Setup Defaults. These steps should help you resolve the Preparing Automatic Repair Loop issue on your Windows 10 Asus device.

Recovering data from Automatic Repair computer

Christopher Wright