In today’s fast-paced world, uninterrupted sleep is a cherished commodity for both humans and computers alike. However, a pesky issue has been causing Windows 10 to stay wide awake when it should be dozing off peacefully. Fear not, for we have unraveled the mystery behind this sleepless dilemma and emerged victorious with a solution. Join us as we delve into the realm of Windows 10 troubleshooting and bid farewell to sleepless nights for our beloved operating system.
Adjust Power Options and Power Plan Settings
1. Open the Power Options menu by pressing Windows + S and searching for “Power Options”.
2. Select “Power Options” from the search results.
3. In the Power Options window, choose the power plan you want to adjust.
4. Click on “Change plan settings” next to the selected power plan.
5. Adjust the time limit for the computer to go into sleep mode in the “Put the computer to sleep” dropdown menu.
6. To prevent certain programs or processes from interrupting sleep mode, click on “Change advanced power settings” and navigate to “Sleep” > “Allow wake timers”.
7. Set the value to “Disable” in both the “On battery” and “Plugged in” sections.
8. Click “Apply” and then “OK” to save the changes.
If your Windows 10 computer still won’t sleep automatically, try the following fixes:
1. Repair system files and delete junk files that may be causing the issue.
2. Update or reinstall device drivers, especially for the network, Wi-Fi, and monitor.
3. Check for power requests that might be preventing the computer from entering sleep mode. Open Command Prompt as an administrator and type “powercfg -requests” to view active power requests.
4. In some cases, third-party applications may be preventing sleep. Close any unnecessary applications or run a clean boot to identify the culprit.
5. Ensure that your computer’s BIOS and firmware are up to date.
6. Disable any sleep timer settings on connected devices such as monitors or Wi-Fi adapters.
By adjusting the power options and trying these solutions, you should be able to fix the automatic sleep issue on your Windows 10 device.
Check for Power Requests and Wake-up Call Settings
To check for power requests and wake-up call settings in Windows 10, follow these steps:
1. Press Windows + S and type “Power & sleep settings” to open the Power & sleep settings page.
2. Make sure the sleep timer is set to the desired time limit. Adjust it if necessary.
3. Check if any programs or processes are preventing your computer from going to sleep. Press Windows + S and type “cmd” to open Command Prompt. Type “powercfg -requests” and press Enter to see a list of active power requests.
4. Disable any unnecessary power requests by closing the corresponding programs or processes.
5. Update your device drivers. Press Windows + S and type “Device Manager” to open the Device Manager. Expand the relevant categories and right-click on each device to select “Update driver.”
6. Repair system files and remove junk files that may be causing sleep issues. Press Windows + S and type “Command Prompt.” Right-click on Command Prompt and select “Run as administrator.” Type “sfc /scannow” and press Enter to scan and repair system files.
7. Check for any recent Windows updates or driver updates that may fix the sleep issue. Press Windows + S and type “Windows Update” to open the Windows Update settings.
8. If you’re using a laptop, ensure that the lid close action is set to “Sleep” in the power settings.
9. If your computer won’t wake up from sleep, check your network settings. Press Windows + S and type “Network status” to open the Network status page. Click on “Change adapter options” and right-click on your Wi-Fi network to select “Properties.” Go to the “Power Management” tab and uncheck the box that says “Allow the computer to turn off this device to save power.”
Use Power Troubleshooter and Power Efficiency Diagnostics Report
If your Windows 10 PC is not automatically going to sleep, you can use the Power Troubleshooter and Power Efficiency Diagnostics Report to fix the issue.
To use the Power Troubleshooter, follow these steps:
1. Press the Windows key + X and select “Settings.”
2. Click on “Update & Security” and then “Troubleshoot.”
3. Scroll down and click on “Power” and then click on “Run the troubleshooter.”
The troubleshooter will identify and fix any power-related issues on your computer.
To generate a Power Efficiency Diagnostics Report, follow these steps:
1. Press the Windows key + X and select “Windows PowerShell (Admin).”
2. Type the command powercfg /energy and press Enter.
3. Wait for the process to complete, and then open the generated report.
The report will provide detailed information about the energy efficiency of your PC and highlight any issues that may be preventing it from sleeping automatically.
By using these tools, you can easily diagnose and resolve the Windows 10 won’t sleep automatically problem.
python
import subprocess
def check_sleep_settings():
try:
# Get current power plan settings
power_settings = subprocess.check_output(['powercfg', '-q']).decode('utf-8')
if "Sleep" in power_settings:
print("Sleep settings found:")
# Extract and print relevant sleep-related information
sleep_info = subprocess.check_output(['powercfg', '-q', 'Sleep']).decode('utf-8')
print(sleep_info)
else:
print("No sleep settings found.")
except FileNotFoundError:
print("powercfg command not found. Make sure you are running this code on Windows 10.")
check_sleep_settings()
This code snippet uses the `powercfg` command-line utility, which is available on Windows systems, to retrieve and display the current power plan settings and sleep-related information. It can help you verify if the sleep settings are configured correctly or identify any potential issues.
Please note that running this code requires Python and Windows 10. Additionally, ensure that the code is executed with appropriate privileges to access the necessary system settings.
Update Device Drivers and Install Missing Drivers
To update device drivers and install missing drivers on Windows 10, follow these steps:
1. Press the Windows key + X and select “Device Manager” from the menu.
2. Expand the categories and locate the devices with yellow exclamation marks or question marks.
3. Right-click on the device and select “Update driver.”
4. Choose the option to search automatically for updated driver software.
5. If Windows doesn’t find a new driver, visit the manufacturer’s website and download the latest driver.
6. Once downloaded, double-click the driver file and follow the on-screen instructions to install it.
Remember to restart your computer after updating or installing drivers for the changes to take effect.
For missing drivers, you can also use the Windows Update feature to automatically download and install them. Just follow these steps:
1. Press the Windows key + I to open the Settings app.
2. Go to “Update & Security” and click on “Windows Update” in the left pane.
3. Click on “Check for updates” and wait for Windows to search for available updates.
4. If any driver updates are found, Windows will automatically download and install them.
5. Restart your computer to apply the changes.
Reset Computer and Perform a Clean Boot
To reset your computer and perform a clean boot, follow these steps:
1. Press the Windows key + R to open the Run dialog box.
2. Type “msconfig” and press Enter.
3. In the System Configuration window, go to the Services tab.
4. Check the box that says “Hide all Microsoft services” and click on “Disable all.”
5. Next, go to the Startup tab and click on “Open Task Manager.”
6. In Task Manager, disable all startup items by right-clicking on each item and selecting “Disable.”
7. Close Task Manager and go back to the System Configuration window.
8. Click on “OK” and then restart your computer.
Note: Performing a clean boot disables all non-essential programs and services, allowing you to troubleshoot issues with your computer’s sleep function. If the problem persists, it may be caused by a device driver or software conflict.
If you’re still experiencing issues with your computer not sleeping automatically, you can try other fixes such as updating your device drivers, checking power settings, or running the power troubleshooter.
Disable Cortana, Hybrid Sleep, and Media Sharing Settings
To disable Cortana, Hybrid Sleep, and Media Sharing settings on Windows 10, follow these steps:
1. Click on the Start menu and open the Settings app.
2. In the Settings app, click on “Cortana & Search” and toggle off the “Hey Cortana” option to disable Cortana.
3. To disable Hybrid Sleep, go to “Power & sleep” settings and click on “Additional power settings.”
4. In the Power Options window, click on “Change plan settings” for your selected power plan.
5. Click on “Change advanced power settings” and expand the “Sleep” category.
6. Disable Hybrid Sleep by setting it to “Off” for both the “On battery” and “Plugged in” options.
7. To disable Media Sharing, open the Control Panel and click on “Network and Internet.”
8. Select “Network and Sharing Center” and click on “Change advanced sharing settings” on the left side.
9. Expand the “Media streaming” section and select “Turn off media streaming.”
Following these steps should help resolve the issue of Windows 10 not sleeping automatically.
Determine Last Wake and Close Background Programs
- Check power settings: Ensure that your power plan is configured to allow your computer to enter sleep mode automatically.
- Update device drivers: Make sure that all your device drivers are up to date as outdated drivers can interfere with sleep mode.
- Scan for malware: Perform a thorough scan of your system to eliminate any potential malware or viruses that may be preventing sleep mode.
- Disable wake timers: Disable wake timers that can wake your computer from sleep mode and prevent it from sleeping automatically.
- Check for conflicting programs: Identify and close any background programs that might be preventing your computer from entering sleep mode.
- Review scheduled tasks: Examine your scheduled tasks and ensure that none of them are set to wake up your computer and hinder automatic sleep mode.
- Adjust network adapters settings: Modify your network adapter settings to prevent them from waking your computer when it’s supposed to be in sleep mode.
- Run Power Troubleshooter: Utilize the built-in Power Troubleshooter tool to automatically detect and fix sleep mode issues.
- Disable fast startup: Turn off the fast startup feature, as it can interfere with the automatic sleep mode functionality.
- Perform a clean boot: Temporarily disable all non-essential startup programs and services to troubleshoot any conflicts that might be preventing sleep mode.
Ignore Power Requests by srvnet driver and Disable Wake Timers
If your Windows 10 won’t sleep automatically, it could be due to power requests by the srvnet driver or wake timers. To fix this issue, follow these steps:
1. Ignore Power Requests by srvnet driver:
– Press Windows key + X and select “Command Prompt (Admin)”.
– Type powercfg -requestsoverride “srvnet” system and press Enter.
– This will ignore power requests from the srvnet driver.
2. Disable Wake Timers:
– Press Windows key + X and select “Power Options”.
– Click on “Change plan settings” next to your selected power plan.
– Click on “Change advanced power settings”.
– Expand “Sleep” and then “Allow wake timers”.
– Set both options to Disable.
Remove Physical Hurdles and Power Cycle Computer
To remove physical hurdles and power cycle your computer, follow these steps:
1. Disconnect any external devices such as USB drives or printers, and ensure your computer is connected to a stable power source.
2. Press and hold the power button for 10 seconds to completely shut down your computer.
3. Unplug the power cord from your computer and wait for 30 seconds. This will allow any residual power to drain from the system.
4. Reconnect the power cord and press the power button to turn on your computer.
By power cycling your computer, you can reset its state and resolve any issues that may prevent it from sleeping automatically. This method is often effective in resolving sleep-related problems and getting your computer back to its normal functioning state.
